SUNSLATES® THE FULL ROOF
SYSTEM
SUNSLATES are a building integrated photovoltaic (BIPV) roof system. It consists of single modules without frames, which are put together to create a complete PV system that acts as a waterproof guaranteed roof.
SUNSLATES is the ideal, simple and reasonable solution for builders and owners with functionality and at the same time aesthetic beauty in a roof.
The simple and fast assembly of the Sunslate roof system convinces architects and craftsmen equally. |
|
Application
possibilities
|
|
A roof surface is suitable for the assembly of a Sunslate
if the roof is south facing (or west or east)
if it remains very unshaded, (by building, high trees etc)
if the roof has a slope of 20 degrees or more. |
|
 |
|
|
Construction
system and assembly
|
|
Slats
system
A SunSlate full roof should be well ventilated.
The sub-construction consists of a batten system, which should be at least 50 mms high to guarantee the ventilation.
There is fastened a batten system made from well dried wood with a cross section of
30 x 120 mms. |
 |
|
|
|
SYSTEM
COMPONENTS
|
|
•
|
|
Sunslate modules
|
• |
|
Water drainage
system
|
• |
|
consists of rubber
supports.
|
• |
|
Fully integrated sealed system
- that is rust proof.
|
• |
|
Wiring, inverter and terminal
box
|
• |
|
Screws and other attachment
material
|
|
|
 |
|
|
SunSlate®- the technical specifications
|
|
• |
|
Module Type
Monocrystalline
|
• |
|
Electrical characteristic:
|
• |
|
Rated power: 23.83 W/p
appoximate value after STC
|
• |
|
Power per m ˛ 110.39 Wp
|
• |
|
Electrical power of the
Sunslate elements up to approx. 23.83
Wp
|
| |
|
All
sockets are fully
insolated.
|
• |
|
Module surface: 0.12 ms
˛
|
• |
|
Surface utilization: 99.37%
|
• |
|
Dimension in cm:
50 x
84, visible area in cm: 50 x 40
|
• |
|
Number of cells per sunslate: 6
pieces
|
|
|
|
|
|
